Classic American cars

INTAKE MANIFOLDS: WEIAND : EDELBROCK : PONTIAC : CHEVROLET : HOLLEY: TORKER

SOLD SOLD SOLD SOLD
WEIAND 1995 HI RAM tunnel ram intake for 318, 340, 360 MOPAR.
Very nice condition, had very little use.
$490 on Summit and Jegs plus shipping and taxes.
£350 plus shipping


—————————————————————————————————————

VERY VERY NICE EDELBROCK VICTOR JUNIOR INTAKE
PART NUMBER 2975

EXCELLENT CONDITION, LOOKS LIKE NEW.

FIT SMALL BLOCK CHEVROLET 283, 327, 305,350, 383, 400 PRE 1986.

WHAT MR EDELBROCK SAYS ABOUT THE VICTOR JUNIOR.
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.

Part Number:EDL-2975

Intake Section Included: Complete
Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: One
Intake Style: Single plane
Basic Operating RPM Range: 3,500-8,000
Intake Manifold Height: 4.580 in.
Intake Finish: Natural
Intake Material: Aluminum
EGR: No
Quantity: Sold individually.
Notes: Low-profile design for applications with limited under hood clearance.


————————————————————————————————–
WEIAND ACTION PLUS
PART NUMBER 8120

Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: One
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Manifold Height: 4.000 in.
Intake Finish: Natural
Intake Material: Aluminum
EGR: No

Notes: No provision for EGR, hot-air, or divorced chokes.


——————————————————————————————————–

HOLLEY STREET DOMINATOR Single plane intake for Small Block Chevrolet, all threads are good and it has been aluminium oxide blasted and then bead blasted to finish it off, looks very very good, intake manifold gaskets are available, ready to fit and go.

A lovely performance manifold for the Small Block Chevrolet, will fit 283, 305, 327,350, 383 and 400 cubic inch up to 1986.

£100 plus shipping, collection from Norwich welcome


_____________________________________________________________________________________________________________________

The CHEVROLET 3972110 is a production 1970 only intake for Corvette, Yenko Nova and Z28 Camaro with LT1 350ci 360 AND 370 horse motors.

This intake has NO hole in the front for the oil filler tube.

This intake has been repaired around the small heater water outlet, it was cracked as quite a lot of them are, it is very common for them to crack when the steel hose adaptor is removed from the aluminium intake.

It has been professionally welded and re-tapped/threaded.


And this is how it looks now, bead blasted and repaired, a beautiful period intake manifold.


_____________________________________________________________________________________________________________________
EDELBROCK INTAKE FOR BIG BLOCK CHEVROLET WITH OVAL PORT HEADS.

TR2X TUNNEL RAM BOTTOM SECTION WITH TR4X TOP SECTION TO TAKE ONE FOUR BARREL CARBURETTOR.

TOP CAN BE REMOVED AND CHANGED FOR A DUAL CARB’ SETUP TOP SECTION.

BEAD BLASTED AND CLEANED, ONE WATER OUTLET REPAIRED AND A HOLE IN THE LIFTER VALLEY COVER SECTION WELDED WHERE IT MAY HAVE BEEBN DRILLED FOR A PCV VALVE?

£100 plus shipping

_____________________________________________________________________________________________________________________

PONTIAC GTO 1967 CAST IRON INTAKE

Casting number 9786286
Casting date January 10th 1967


__________________________________________________________________________________________________________________

PONTIAC 4 BARREL INTAKE 1977
525355 CASTING NUMBER
March 25th 1977 casting date


___________________________________________________________________________________________________________________

Share
Credit card payments